Audi A3 (8Y) – Activate RS Monitor on MMI (Coding)
Purpose: Allows to enable the RS Monitor on the MMI (MIB3).
The RS Monitor replaces the “Vehicle Details” tab, but contains the same “Lean Angle Display” as the first page.
Proceed:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 5F – Electrical Information ”.
4 – Click on “ Coding – 07 ”
5 – Click on “ Long Coding Wizard ”.
6 – Select Byte 05
Bit 0 enabled
Bit 1 disabled
Before applying the coding, in the menu, check the box “warm reboot / soft reset”
