Audi A3 (8V) – Lane Assist settings (Coding)

Audi A3 (8V) – Lane Assist settings (Coding)
Audi A3 (8V) – Lane Assist settings (Coding)

Purpose : Allows you to adjust the adaptation of the lane departure warning, the deactivation threshold due to driver inactivity, the intensity of the steering assistance, and the intensity of the steering wheel vibrations of the Audi Lane Assist.

 

Proceed:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.

2 – Switch on the ignition and then start the VCDS program.

 

 

Adjust the driver inactivity deactivation threshold :

 

3 – Click on “  Select  ” then click on “ A5 – Front Camera ”.

4 – Click on “  Security Access – 16  ” then type the code “ 20103 ”

5 – Click on “ Adaptation – 10 ”

6 – Select Channel : “  Lane Departure Warning Deactivation Threshold Driver Inactivity  ” or “Deaktivierungsschwelle Fahrerinaktivität”

Adjust the value accordingly
Setting value range:

– early (deactivates Lane Assist within 7 seconds)
– medium (factory setting, deactivates Lane Assist within 7 to 10 seconds)
– late (deactivates Lane Assist within 11 to 15 seconds)

 

 

Adjust the intensity of steering assistance :

 

3 – Click on “  Select  ” then click on “ A5 – Front Camera ”.

4 – Click on “  Security Access – 16  ” then type the code “ 20103 ”

5 – Click on “ Adaptation – 10 ”

6 – Select Channel “Lane Departure Warning Intensity Steering Assistance” or “Lane Departure Warning Intensity Steering Assistance”

Adjust the value accordingly
Setting value range:

– low (Lane Assist switches off earlier depending on the ambient conditions, because less/more sensitive steering interventions are carried out)
– medium (factory setting)
– high (Lane Assist switches off later depending on the ambient conditions, because more/more intensive steering interventions are carried out)

 

 

Adjust the intensity of the steering wheel vibrations :

 

3 – Click on “  Select  ” then click on “ A5 – Front Camera ”.

4 – Click on “  Security Access – 16  ” then type the code “ 20103 ”

5 – Click on “ Adaptation – 10 ”

6 – Select Channel : “  Steering wheel vibration intensity  ” or “Intensität Lenkradvibration”

Adjust the value accordingly
Setting value range:

– low
– medium (factory setting)
– high