Audi A3 (8V) – Change MMI boot logo (Coding)
Purpose: Allows you to display another logo when launching (Startup Screen) the MMI.
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 5F – Electrical Information. “.
4 – Click on “ Security Access – 16 ” then enter the code “ 20103 ”
5 – Click on “ Coding – 07 ” then click on “ Long Coding Wizard ”
6 – Choose byte “ 18 ”
Then change the value of the box to “ 3 ” of the long coding
List:
00=A3
01=A3
02=S3
03=RS3
Or if you have a bit 0-7 drop down list, select your logo.
