Audi A3 (8V) – Tail lights activated with daytime running lights (DRL) (Coding)
Purpose: Allows you to activate the taillights activated with the daytime running lights (Scandinavian DRL).
Attention!! There is, here, 1 line of coding to do or 2.
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Method 1 for all types of taillights:
This method activates the dashboard lighting but much simpler!!!
Line 1:
3 – Click on ” Select ” then click on ” 09 – Central Electrics “.
4 – Click on ” Security Access – 16 ” then enter the code ” 31347 ”
5 – Click on ” Adaptation – 10 “.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Daytime running lights-Daytime running lights-Daytime running lights activated separately Standlight ”
7 – On this same page, there is a second drop-down menu but towards the bottom of the page.
On the latter, choose “ active ” then validate.
Method 2 for LED taillights :
Line 1:
3 – Click on “ Select ” then click on “ 09- Power plant ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Leuchte23SL HLC10-Lichfunktion D 23 ”
7 – On this same page, there is a second drop-down menu but towards the bottom of the page.
On this last one, choose “ Daytime running lights ” then validate.
Line 2:
3 – Click on “ Select ” then click on “ 09- Power plant ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Leuchte24SL HRA65-Lichfunktion D 24”
7 – On this same page, there is a second drop-down menu but towards the bottom of the page.
On this last one, choose “ Daytime running lights ” then validate.