Audi A3 (8V) – Increase throttle sensitivity (Coding)

Purpose: Allows you to increase the sensitivity of the accelerator pedal. (better acceleration response time in S Tronic, more significant than in manual).

Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.

2 – Switch on the ignition then launch the VCDS program.

Line 1:

3 – Click on “ Select ” then click on “ 44 – Steering Assistance ”.

4 – Click on “ Security Access – 16 ” then type the code “ 19249 ”.

5 – Click on “ Adaptation – 10 ”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Driving profile switchover” . 7 –

On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose the value: “ directly: controlled by threshold value ” / “ Direct controlled over threshold value ” then validate.