Audi A3 (8V) – Increase the distance between the curb and the car (Park Assist) (Coding)
Purpose: Allows you to configure the distance between the curb and the car during Park Assist.
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 10 – Park/Steer Assist ” / “10 – Assistance stationnt”
4 – Click on “ Security Access – 16 ” then enter the code “ 71679 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Abstand zum Bordstein” / “ Distance to curb ” / “Ecart avec la bordure”
7 – On this same page there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose the distance according to your preference (in cm). Default value “ 15cm ” then validate.