Audi A3 (8V) – Hill Start Assist (Coding)
Purpose: Allows you to adjust the operation of the Hill Start Assist. (Hill Hold)
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on ” Select ” then click on ” 03 – ABS Brakes ” (or ” 03 – ABS Brakes “).
4 – Click on ” Adaptation – 10 “.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose ” Hill Start assistant ”
6 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose the value according to your preference:
- ” normal ” (default)
- “ Early ” (faster triggering)
- “Late” (later trigger)
then validate.