Audi A3 (8V) – Check the needles (Coding)
Purpose: Enables the sweep of the speedometer needles when starting the car. (Compatible with A3 8V2 Virtual Cockpit)
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 17 – instruments ”.
4 – Click on “ Coding – 07 ” then click on “ Long Coding Wizard ”.
5 – Choose byte “ 1 ”
Then check Bit “ 0 ”: “ Gauge Test/Needle Sweep (Stading) active ”
