Audi A3 (8V) – Activate the wiper replacement position menu on MMI (Coding)
Purpose: Activates the position for replacing the wiper blades so that it can be controlled in the MMI menu. After activation, the wipers move to the service position.
Tip for the wiper replacement position without menu: switch off the ignition and then hold the wiper lever in the lowest position until the wipers move to the replacement/service position.
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 09 – Central Electrics ”.
4 – Click on “ Security Access – 16 ” then enter the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Windshield wiper-Menuesteuerung Frontwischer” / “Frontscheibenwischer-Menuesteuerung Frontwischer”
7 – On this same page, there is a second drop-down menu but towards the bottom of the page.
On the latter, choose “ Active ” then validate.