Audi A3 (8V) – Activate the Lane Assist memory function (Coding)
Purpose: Allows you to remember the Lane Assist function, if you deactivate it, the Lane Assist does not automatically restart at the next start. (For 8V1 phase 1 and 8V2 Facelift)
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle or your OBDeleven box.
2 – Switch on the ignition then launch the VCDS program or the OBDeleven application.
Line 1 (For Camera A5 5Q0 / 3Q0):
3 – Click on ” Select ” then click on ” A5 – Frt Sens. Drv. Assist “.
4 – Click on ” Security Access – 16 ” then enter the code ” 20103 ”
5 – Click on ” Adaptation – 10 “.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Personalization of lane dept. warning Cl. 15 on “
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ last setting ” then validate.
Line 1 (For Camera A5 2Q0):
3 – Click on “ Select ” then click on “ A5 – Frt Sens. Drv. Assist ”.
4 – Click on “ Coding – 07 ” then click on “ Long Coding Assistant ”
5 – Choose the byte “ 09 ”
Then check Bit 0-1 “ 03 Configuration_for_lane_departure_warning_Kl15, Last_setting ”