Audi A1 (8X) Facelift – Activate Hill Start Assist (Coding)
Purpose: Allows you to activate the Audi Hill Start Assist.
Audi Hill Start Assist is a hill start assistant. If you hold down the brake pedal for a certain period of time when the vehicle is stationary, the brake pressure is retained for a few seconds after releasing the brake pedal, making hill starts easier.
Proceed as follows:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 03 – ABS Brakes ” (or “ 03 – ABS Brakes ”).
4 – Click on “ Coding-07 ” then “ Long Coding Wizard ”
5 – Choose Byte 22 :
Bit 0 : Check the box
Line 2:
3 – Click on “ Select ” then click on “ 03 – ABS Brakes ” (or “ 03 – ABS Brakes ”).
4 – Click on “ Adaptation – 10 ”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Hill Start assistant ” .
6 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On this last one, choose the value according to your preference:
- ” normal ” (default)
- “ Early ” (faster triggering)
- “ Late ” (later trigger)
then validate.