Audi A1 (8X) – Enable DVD playback while driving (Video in motion – VIM) (Coding)
Purpose : Allows you to remove the MMI protection and continue watching a DVD or video while driving. (Video in Motion)
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Step 1: Retrieving the serial number of the MMI 2G/3G
3 – Click on “ Select ” then click on “ 5F-Electr. d’informat. “ for MMI 3G or “ 07 – Display/Cmde ” for MMI 2G
4 – Click on “ Advanced Ident -1A ”
Retrieve the serial number (If there is more than one serial number, use the first one !)
Step 2 Calculating the security code
Enter the serial number previously retrieved from the website (your
choice and subject to availability):
- VIM AUDIENTHUSIATS
- BESTCARMODS VIM
The site will display your security code.
An alternative security code is also generated.
Step 3 Enter the security code
3 – Click on “ Select ” then click on “ 5FElectr. dʼinformat. “ for
MMI 3G or “ 07 Display/Cmde ” for MMI 2G
4 – Click on “ Secure access 16 ”
Enter security code
Use alternate security code, if first code does not work)
Step 4 Removing Protection
3 – Click on “ Select ” then click on “ 5FElectr. dʼinformat. “ for
MMI 3G or “ 07 Display/Cmde ” for MMI 2G
4 – Click on “ Adaptation 10 ”
5 – Choose Channel 48 for MMI 3G or Channel 63 for MMI 2G
Set the value to 255
Step 5 Restart the MMI
Press MENU Wheel + Upper Right Button simultaneously