Audi A1 (8X) – Display of reversing radars on MMI (Coding)
Purpose : Allows you to activate the visualization of the reversing radars on the MMI, for vehicles that only have the Audi Parking System rear option.
Requires at least module 8X0-919-475-F
On some vehicles equipped with the 8X0-919-475-F module, activation does not work.
No problem for vehicles equipped with the 8X0-919-475-M module
Proceed:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to
the computer and then connect the other end to the diagnostic socket on your vehicle.
2 – Turn on the ignition and start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 10 – Parking assistance ”.
4 – Click on “ Security Access – 16 ” then type the code “ 71679 ”
5 – Click on “ Coding – 07 ” then “ Long Coding Wizard ”
6 – Byte 0 :
Bit 2-3 : Select “08 Optical Illustration active (BAP NEW)”
Restart the MMI
Method 1
Hold MENU (1) + Wheel (2) + Upper Right Button (3) for 6 sec.
Method 2 (if method 1 doesn’t work)
Hold BACK (1) + Wheel (2) + Upper Right Button (3) for 6 sec.
Line 2:
3 – Click on “ Select ” then click on “ 10 – Parking assistance ”.
4 – Click on “ Adaptation – 10 ”
6 – Select “Visual display for park assist” from the drop-down list
Change the value with OPS Display