Audi A1 (8X) – Disable seat belt alarm (Coding)
Purpose: Allows you to suppress the audible alarm and the indicator light on the meter when driving without the seat belt.
Proceed as follows:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 17 – Instruments ”.
4 – Click on “ Adaptation – 10 ”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Deactivate seat belt warning ”
6 – On this same page there is a second drop-down menu but towards the bottom of the page.
On the latter, choose “ Yes ” then validate.
