Audi A1 (8X) – Check the needles (Coding)
Purpose: Allows you to activate the scanning of the speedometer needles when starting the car.
Proceed:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket on your vehicle.
2 – Turn on the ignition and start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 17 – instruments ”.
4 – Click on “ 10-Adaptation ” then in the window that appears, click on the drop-down menu to choose a channel and select the “ Staging ” channel, if unavailable select the “ indicator_celebration ” channel:
5 – In the “ New value ” box, click on the drop-down menu and select “ active ”, once this new value is entered, click on “ Save ”:
