Audi A1 (8X) – Change MMI RMC boot logo (Coding)
Purpose : Allows you to modify the MMI RMC splash screen.
Proceed:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 5F – Electrical Information ”.
4 – Click on “ Coding – 07 ”
5 – Click on “ Long Coding Wizard ”.
6 – Select Byte 03
standard logo:
Bit 0 disabled
Bit 1 disabled
S-Line logo:
Bit 0 enabled
Bit 1 disabled
S logo:
Bit 0 disabled
Bit 1 enabled
RS logo:
Bit 0 enabled
Bit 1 enabled
