Audi A1 (8X) – Brake lights in Flash mode during emergency braking (Coding)
Purpose : Allows the brake lights/turn signals to be activated in flash mode during emergency braking.
Proceed :
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Coding 07 ”.
5 – Select module “0” and click on “Long coding assistant”:
Byte 16 :
Bit 1 : Check “Emergency Brake Flashing via Brake Light active” (to activate the brake lights)
Bit 2 : Check “Emergency Brake Flashing via Turn Signal active” (to activate the turn signals)
