Audi A1 (8X) – Beeps when locking/unlocking the vehicle (Coding)
Purpose : Allows you to activate the Beeps when locking/unlocking the vehicle.
Only for vehicles with original alarm
(1 beep for locking, 2 beeps for unlocking)
Proceed :
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Coding 07 ”.
5 – Select module “0” and click on “Long coding assistant”:
Byte 05 :
Bit 1 : Check “Locking Confirmation via Horn active”
Bit 4 : Check “Unlocking Confirmation via Horn active”
Enable “sound on lock” display in MMI:
Byte 05 :
Check Bit 2