Audi A3 (8V) – Gear change recommendation activation (Coding)
Purpose: Enables the gear change recommendation. The gear change recommendation is then displayed in the lower area of the ODB.
Proceed as follows:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 17 – Instruments ”.
4 – Click on “ Coding – 07 ” then click on “ Long Coding Wizard ”.
5 – Choose byte “ 1 ”
Then check Bit “ 5 ”
