Audi A3 (8V) – Activate voice control (Coding)
Purpose: Enables voice control.
Proceed as follows:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 5F – Electrical Information ”.
4 – Click on “ Security Access – 16 ” then enter the code “ 20103 ”.
5 – Click on “ Coding – 07 ” then “ Long Coding Wizard ”.
6 – Choose Byte 24 :
Check Bit 1