Audi A3 (8V) – Activate heated mirrors (retrofit) (Coding)
Purpose: Allows you to activate the heated and defrosted mirrors after retrofitting.
Proceed as follows:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then launch the VCDS program.
Line 1:
3 – Click on “ Select ” and then click on “ 42-Driver’s door ”.
4 – Click on “ Coding – 07 ”
5 – Select byte 04 and Uncheck bit 0 “Heated Mirrors NOT installed”
Line 2:
3 – Click on “ Select ” then click on “ 52 – Passenger Door ”.
4 – Click on “ Coding – 07 ”
5 – Select byte 04 Uncheck bit 0 “Heated Mirrors NOT installed”
