Audi A3 (8P) – Outside temperature display in the on-board computer (Coding)
Purpose: Allows you to add the outside temperature display to the on-board computer.
Proceed as follows:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 17 – instruments ”.
4 – Click on “ Adaptation – 10 ” then click on “ Channel 20 ”.
5 – Set the last digit to 1 (xx1)
