Audi A3 (8P) Facelift – Speedometer lighting (Coding)

Purpose : Allows you to change the lighting of the hands and the dial.

Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.

2 – Switch on the ignition then launch the VCDS program.

Line 1:

3 – Click on “ Select ” then click on “ 17 – Instruments ”.

4 – Click on “ Coding – 07 ”

Enter the value in the last digit of the coding (00xxxx ? ) depending on the desired ignition:

5 = Needles off and Dial off (with ignition and without lights)
6 = Needles on and Dial off (with ignition and without lights)
7 = Needles off and Dial on (with ignition and without lights)
8 = Needles on and Dial on (with ignition and without lights, with variable lighting)
9 = Needles on and Dial on (without ignition and without lights, without variable lighting)?)