Audi A3 (8P) – Error counter for electrical management (Coding)
Purpose: Allows you to set the number of errors allowed before generating an alert.
Proceed as follows:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 09- Central electrics ”.
4 – Click on “ Adaptation – 10 ”.
5 – Choose Channel 06
Choose a value between 0 and 3 (default: 0)