Audi A3 (8P) – Automatic door unlocking of the doors when the ignition key is removed (Coding)
Purpose: Allows you to configure automatic unlocking of the doors when the ignition key is removed.
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 46 – Comfort Module ”.
4 – Click on “ Adaptation – 10 ”
Channel 05
Set the value to 1
Line 2:
If the adaptation channel is not activated.
3 – Click on “ Select ” then click on “ 46 – Comfort Module ”.
4 – Click on “ Coding – 07 ” then Long Coding Wizard
Byte 0 :
Bit 3 : Check “Auto-Unlock (unlocking after removing key from ignition)“
