Audi A3 (8P) – Activate heated mirrors (retrofit) (Coding)
Purpose: Allows you to activate the heated and defrosted mirrors after retrofitting.
Proceed as follows:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 42-Driver door ”.
4 – Click on “ Coding – 07 ” then Add 32 to the existing value .
Line 2:
3 – Click on “ Select ” then click on “ 52 – Passenger Door ”.
4 – Click on “ Coding – 07 ” then Add 32 to the existing value.
