Audi A3 (8L) – Remove seat belt alarm (Coding)
Purpose : Allows you to suppress the audible alarm and the indicator light on the meter when driving without a seat belt.
Proceed:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then launch the VCDS program.
Line 1:
3 – Click on “ Select ” and then click on “ 17 – Instruments ”.
4 – Click on “ Coding 07 ”.
5 – The first two digits of the coding ( ?? xxx) are used to modify the options of the Instrument module. To remove the seat belt alarm, subtract 02 from these digits.
In the example above the initial coding (with seat belt alarm) is: 07232
To remove the seat belt alarm, simply recode as follows: 05232 (07 – 02 = 05)
To activate the seat belt indicator: +02