Audi A3 (8L) – Adjusting the sensitivity of the interior monitoring (Coding)
Purpose: Allows you to adjust the sensitivity of the interior monitoring sensors.
Proceed as follows:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 45 – interior monitor ”.
4 – Click on “ Adaptation – 10 ” then click on “ Channel 01 ”.
5 – New value: sensitivity
minimum: 1
maximum: 100