Audi A1 (GB) – Use of the key even if the ignition is on (Coding)
Purpose: Allows you to use the key and lock the vehicle with the ignition or engine running. (Very practical with a Keyless Kessy key)
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on ” Select ” then click on ” 09- Central electrical system “.
4 – Click on ” Security Access – 16 ” then enter the code ” 31347 ”
5 – Click on ” Adaptation – 10 “.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose ” Access control-Funk bei Klemme 15 ein ”
7 – On this same page there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose ” active ” then validate.