Audi A1 (GB) – Tail lights activated with daytime running lights (DRL) (Coding)

Audi A1 (GB) – Tail lights activated with daytime running lights (DRL) (Coding)

Purpose: Allows you to activate the rear lights activated with the daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting)

Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.

2 – Switch on the ignition then launch the VCDS program.

Line 1:

3 – Click on “  Select  ” then click on “  09 – Central Electrics ”.

4 – Click on “  Security Access – 16  ” then enter the code “  31347 ” 

5 – Click on “ Adaptation – 10 ”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “  Daytime running lights-Daytime running lights-Daytime running lights activated separately Standlight ” 

7 – On this same page, there is a second drop-down menu but towards the bottom of the page.
On the latter, choose “  active  ” then validate.