Audi A1 (GB) – Speed of deactivation of radars (or reversing camera) (Coding)
Purpose: Allows you to choose the speed at which the radars and/or the reversing camera are deactivated.
Proceed as follows:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition and then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 10 – Parking assistance ”.
4 – Click on “ Security Access – 16 ” then enter the code “ 71679 ” .
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Switch-off speed for parking assist ” .
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On this latter, choose a value according to your preference between “ 0 ” and “ 15 ” km/h.