Audi A1 (GB) – Engine start button pulse (Coding)
Purpose: Allows you to activate the light pulses (heartbeat) for contacting the Start Engine Stop button for the keyless start option.
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 05 – Access/start authorization ”.
4 – Click on “ Security Access – 16 ” then enter the code “ 20103 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ ZAT_illumination_concept_mybeat_clamp58xt ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ Active ” then validate.
Line 2:
3 – Click on “ Select ” then click on “ 05 – Access/Start Authorization ”.
4 – Click on “ Security Access – 16 ” then type the code “ 20103 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ ZAT_illumination_modus_mybeat_clamp58xt ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ Active ” then validate.
