Audi A1 (GB) – Drying brake discs (Coding)
Purpose: Allows you to adjust the intensity of the brake disc drying. If your car tends to squeak when you have parked it in the rain for example, the annoying drying of the disc brakes can be reduced or even completely disabled so that there are no more scratches or squeaks.
Proceed as follows:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 03- Electronic brakes ”.
4 – Click on “ Security Access – 16 ” then enter the code “ 40304 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ brake disc drying ”.
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose the value according to your choice: “ not activated, low, medium, high ” then validate.