Audi A1 (GB) – Display top-up quantity (Coding)
Purpose: Allows you to display the amount of fuel used since refueling on the OBD / Virtual Cockpit.
Proceed as follows:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 17 – Instruments ”.
4 – Click on “ Coding – 07 ” then click on “ Long Coding Wizard ”.
5 – Choose byte “ 10 ”
Then check Bit “ 4 ”: “Volume to Be Replenished”
If it is a hidden bit, replace the 0 with a 1 in ” Binary ”
