Audi A1 (GB) – Comfort Indicator (Coding)
Purpose: Allows you to set the number of flashes for the “Comfort Flasher” option
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then launch the VCDS program.
Line 1:
3 – Click on ” Select ” then click on ” 09- Central electrical system “.
4 – Click on ” Security Access – 16 ” then enter the code ” 31347 ”
5 – Click on ” Adaptation – 10 “.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose ” Turn signal control-Komfortblinken Blinkzyklen ”
7 – On this same page there is a second drop-down menu but towards the bottom of the page.
On the latter, choose between ” 3 ” and ” 5 ” then validate.
Information: If after coding the modification of the number of flashes has not changed, on your MIB screen: CAR -> Settings -> factory settings -> lighting (Your interior light configurations will also be reset to factory settings)