Audi A1 (GB) – Automatic door unlocking with DSG in “P” (Coding)
Purpose: Allows all doors to be automatically unlocked when the DSG automatic gearbox is shifted to position “P”.
Proceed:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket on your vehicle.
2 – Turn on the ignition and start the VCDS program.
3 – Click on “Select” then click on “09 – Power Station” .
4 – Click on “Security Access – 16” then type the code “31347”
5 – Click on “Adaptation – 10” .
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Access control – Autounlock NAR”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “active” , then validate.