Audi A1 (GB) – Activate the burglar alarm with horn (Coding)
Purpose: Allows an alarm with horn to be activated in the event of intrusion into the locked vehicle when the door is opened.
Attention!! There are 11 lines of coding to do here.
For vehicles without original alarm!
Proceed:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer then connect the other end to the diagnostic socket of your vehicle.
2 – Switch on the ignition then start the VCDS program.
Line 1:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Additional functions – Signalhorn without KL 15 ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ active ” then validate.
Line 2:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Anti-theft protection – Akustischer Alarm Signalhorn ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ active ” then validate.
Line 3:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Anti-theft protection – Alarmsignal ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ frequency modulated ” then validate.
Line 4:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Anti-theft protection – DWA Alarmverzoegerung ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ driver door contact thatcham ” then validate.Line 5:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Anti-theft protection – DWA Camper Modus ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ active ” then validate.
Line 6:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Anti-theft protection – Sirenen Alarmzahl ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ 10 alarm ” then validate.
Line 7:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Anti-theft protection – Verzoegerung Panikalarm ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ 2 sekunden verzoegerung ” then validate.
Line 8:
3 – Click on “ Select ” then click on “ 09- Power station ”.
4 – Click on “ Security Access – 16 ” then type the code “ 31347 ”
5 – Click on “ Adaptation – 10 ”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Anti-theft Protection – Anti-theft Alarm System ”
7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “ active ” then validate.