Audi A1 (GB) – Activate daytime running lights (DRL) only in Auto position (Coding)

Purpose: Allows you to activate the daytime running lights (DRL) only with the headlight adjustment switch in the auto position.

Proceed as follows:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic socket of your vehicle.

2 – Switch on the ignition and then launch the VCDS program.

Line 1:

3 – Click on “  Select  ” then click on “  09- Central electrical system ”.

4 – Click on “  Security Access – 16  ” then enter the code “  31347 ”  .

5 – Click on “  Adaptation – 10 ”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “  Daytime running lights-Tagfahrlicht nur in Schalterstellung AUTO ” 

7 – On this same page, there is a second drop-down menu but towards the bottom
of the page.
On the latter, choose “  active  ” then validate.

Audi A1 (GB) – Activate daytime running lights (DRL) only in Auto position (Coding)
Audi A1 (GB) – Activate daytime running lights (DRL) only in Auto position (Coding)